Close

Machines, Tools and Accessories

Display per page

Light standing seam roll-forming machine P-HT-CE

Ref.ª P-HT-CE

FEATURES:

Aluminium, Copper and Zinc until 0.8 mm thickness.

Galvanized sheet until 0.7 mm thickness.

Ajustable range: See the diagram below.

Partial or full, Automatic transversal cut

Automatic longitudinal cut with or without roll-forming

Control console with 7'' Colour touch screen

Tray length programming

Roll forming speed: 5 - 15 m/min

The Handy Tool M1070 for Cutting

The Handy Tool M1070 for Cutting is an ideal tool for the workshop as well as for the site and for cutting a large range of metal:

  • Galvanized steel: 0.7mm

  • Aluminium: 0.8mm

  • Copper: 0.8mm

  • Zinc: 0.8mm

  • Stainless steel: 0.5mm


Other characteristics:


  • Minimum cutting radius: 450 mm

  •  Weight: 1.28 kg

  • Ergonomic handle

  • Handle rod, to be easily and quickly extended on demand

  • Straight and slightly curved cutting

  • cutting off from coil

  • Delivered in a handy carrying case

Little slitter M1020N-AK - with cordless or electric drive

The little slitter M1020N-AK - with cordless or electric drive is an ideal tool for the workshop as well as for the site and for cutting a large range of metal:

  • Galvanized steel: 0.8mm

  • Aluminium: 1mm

  • Copper: 1mm

  • Zinc: 1mm

  • Stainless steel: 0.6mm


Other characteristics:


  • Minimum cutting radius: 500 mm

  •  Weight: 4.10 kg

  • Ergonomic handle

  • Variable cutting speed

  • For precise and effortless cutting wheter straight or curved, short or long metal sheets

  • For cutting according to scribe lines or with an adjustable guide

  • Delivered in a handy carrying case

  • Optional accessory: Adjustable guide with range to 650mm max.

Portable bender from 5 to 200mm QPM-200 (Manual)

The portable bender demands less space and is particularly well suited for bending in sheet metal fabrication:

  • Aluminium and Zinc: 1mm

  • Cooper: 0.8mm

  • Galvanized sheet: 0.7mm

  • Stainless steel sheet: 0.5mm


    Other features:


    • Bending Height: 5 a 200mm

    • Maximal Angle: 100º

    • Weight: 3.07 Kg

    • Quick and easy bending of long, straight sheet metal panels

    • Storage pocket

    Portable bender from 5 to 350mm QPM-350 (Manual)

    The portable bender demands less space and is particularly well suited for bending in sheet metal fabrication:

    • Aluminium and Zinc: 1mm

    • Cooper: 0.8mm

    • Galvanized sheet: 0.7mm

    • Stainless steel sheet: 0.5mm


      Other features:


      • Bending Height: 5 a 350mm

      • Maximal Angle: 100º

      • Weight: 3.99 Kg

      • Quick and easy bending of long, straight sheet metal panels

      • Storage pocket

      Portable bender from 0º to 180º HB8200 (Manual)

      The portable bender demands less space and is particularly well suited for bending in sheet metal fabrication:

      • Galvanized sheet: 0.8mm

      • Aluminium: 0.8mm

      • Copper: 0.8mm

      • Zinc: 0.8mm


      Other features:


      • Bending height: 6 to 200mm

      •  Weight: 3.02 Kg

      • Quick and easy bending of long,straight sheet metal panels

      • Carrying Case

      Manual seamer M1040

      The manual seamer M1040 is an ideal tool for closing the single-lock standing seam at the workshop as well as for the site. It could lock a large range of metal:

      • Galvanized steel: 0.65mm

      • Aluminium: 0.8mm

      • Copper: 0.8mm

      • Zinc: 0.8mm

      • Stainless steel: 0.5mm


      Other characteristics:


      • Width of the profile: 12-15mm

      •  Weight: 2.9 kg

      • Ergonomic handholds above and on both sides of the tool

      • Closes the profile in both directions

      • Simple removal of the tool from seam by relieving pressure – at any time and without scratching

      • Rope-tying device included

      • Delivered in a handy carrying case

      Electric locker machine for 1st and 2nd seam for trays

      The electric roof seaming machine is an ideal tool for closing the single or double-lock standing seam at the workshop as well as for the site. It could lock a large range of metal.

      Electric roof seaming machine M1008

      The electric roof seaming machine M1008 is an ideal tool for closing the single or double-lock standing seam at the workshop as well as for the site. It could lock a large range of metal:

      • Galvanized steel: 0.75mm

      • Aluminium: 0.8mm

      • Copper: 0.8mm

      • Zinc: 0.8mm


      Other characteristics:


      • Adjustable for different seaming heights (min. height 25 mm)

      •  Weight: 7.50 kg

      • Profiles straight from start of strips - can also be used for small roof surfaces as well as slanting, angular and off-set elements

      • Even allows for profiling on narrow surfaces: minimum distance from seam centre to seam centre (bay width) about 80 mm

      • Simple removal of the tool from seam by relieving pressure – at any time and without scratching

      • For round roof surfaces (domed roofs) down to min. radius of 2 m

      • Smaller radius (min. 0.8 m/32″) by using a round rail

      • Delivered in a handy carrying case

      Electric roof seaming machine M1006

      The electric roof seaming machine M1006 is an ideal tool for closing the single or double-lock standing seam at the workshop as well as for the site. It could lock a large range of metal:

      • Galvanized steel: 0.75mm

      • Aluminium: 0.8mm

      • Copper: 0.8mm

      • Zinc: 0.8mm


      Other characteristics:


      • Adjustable for different seaming heights (min. height 25 mm)

      •  Weight: 5.30 kg

      • Closes straight from start of trays – can also be used for small roof surfaces, slanting, angular and off-set elements

      • Simple removal of the tool from seam by relieving pressure – at any time and without scratching

      • For round roof surfaces (domed roofs) down to min. radius of 0.2 m

      • Can be removed from seam at any time

      • Delivered in a handy carrying case
      Previous 1 2 3 Next