DIMENSIONS AVAILABLE:
3.80 MT
4.40 MT
DIMENSIONS AVAILABLE:
3.20 MT
3.80 MT
4.40 MT
Ref.ª P-LT
FEATURES:
Aluminium, Copper and Zinc until 0.8 mm thickness.
Galvanized sheet until 0.7 mm thickness.
Ajustable range: min 250 to max 800 mm.
Roll forming speed: 9 m/min.
No manual transversal cut integrated
Ref.ª P-LT-C
Ref.ª P-LT
FEATURES:
Aluminium, Copper and Zinc until 0.8 mm thickness.
Galvanized sheet until 0.7 mm thickness.
Ajustable range: min 250 to max 800 mm.
Roll forming speed: 9 m/min.
Manual transversal cut integrated
Ref.ª P-HT
FEATURES:
Aluminium, Copper and Zinc until 0.8 mm thickness.
Galvanized sheet until 0.7 mm thickness.
Ajustable range: See the diagram below.
Partial or full, manual transversal cut
Automatic longitudinal cut with or without roll-forming
Control console with 7'' Colour touch screen
Tray length programming
Roll forming speed: 5 - 15 m/min
Ref.ª P-BA
FEATURES:
Aluminium, Copper and Zinc until 0.8 mm thickness.
Galvanized sheet until 0.7 mm thickness.
Ajustable range: See the diagram below.
Partial or full, manual transversal cut
Automatic longitudinal cut with or without roll-forming
Control console
Tray length programming
Roll forming speed: 10 m/min.
Ref.ª P-HT-CE
FEATURES:
Aluminium, Copper and Zinc until 0.8 mm thickness.
Galvanized sheet until 0.7 mm thickness.
Ajustable range: See the diagram below.
Partial or full, Automatic transversal cut
Automatic longitudinal cut with or without roll-forming
Control console with 7'' Colour touch screen
Tray length programming
Roll forming speed: 5 - 15 m/min
The Handy Tool M1070 for Cutting is an ideal tool for the workshop as well as for the site and for cutting a large range of metal:
Other characteristics:
The little slitter M1020N-AK - with cordless or electric drive is an ideal tool for the workshop as well as for the site and for cutting a large range of metal:
Other characteristics:
The portable bender demands less space and is particularly well suited for bending in sheet metal fabrication:
Other features:
The portable bender demands less space and is particularly well suited for bending in sheet metal fabrication:
Other features:
The portable bender demands less space and is particularly well suited for bending in sheet metal fabrication:
Other features:
Bending height: 6 to 200mm
The manual seamer M1040 is an ideal tool for closing the single-lock standing seam at the workshop as well as for the site. It could lock a large range of metal:
Other characteristics:
The electric roof seaming machine is an ideal tool for closing the single or double-lock standing seam at the workshop as well as for the site. It could lock a large range of metal.
The electric roof seaming machine M1008 is an ideal tool for closing the single or double-lock standing seam at the workshop as well as for the site. It could lock a large range of metal:
Other characteristics:
The electric roof seaming machine M1006 is an ideal tool for closing the single or double-lock standing seam at the workshop as well as for the site. It could lock a large range of metal:
Other characteristics:
